Bovine
Equine
Swine
Ovine
Pet
Hot Products
01
ECI-UK500 Veterinary Ultrasonic Scalpel System - China Suppliers & Factory with 3 Cutter-head Types
Description of Veterinary Ultrasonic Scalpel
The ultrasonic scalpel system consists of a main unit, foot pedal, ultrasonic scalpel handle, and transducer. Ultrasound knife can generate high energy ultrasound to achieve cutting and coagulation of tissue effect.
Application: Neutering and minor Surgery for cats, dogs and other small animals.
Application: Neutering and minor Surgery for cats, dogs and other small animals.
Veterinary Ultrasonic scalpel is a high-frequency electrosurgical device, mainly suitable for soft tissue cutting and vascular closure and other operations. The working principle of ultrasound knife is to use ultrasound frequency generator to make the metal blade to a certain resonance frequency for high-frequency vibration, usually in the 55000Hz or so, which can make the tissue of water molecules vaporisation, protein hydrogen bond breaking, cell collapse, so as to achieve the tissue cutting or coagulation. At the same time, the veterinary ultrasonic scalpel can quickly close small blood vessels when cutting tissue, reducing bleeding and achieving almost bloodless cutting.
Using Video
Technical Data of Veterinary Ultrasonic Scalpel
| Size | Short | Middle | Long | ||||||
| Type | SRE114 | SRE123 | SRE136 | ||||||
| Length(mm) | 140mm | 230mm | 360mm | ||||||
| Frequency(KHz) | 55.0 55.0~56.0 |
55.0 55.0~56.0 |
55.0 55.0~56.0 |
||||||
| Power (W) | Standby | 2.8 | 2.8 | 2.8 | |||||
| Output | Gear | 1MIN ~ 5MAX | Gear | 1MIN ~ 5MAX | Gear | 1MIN ~ 5MAX | |||
| Screen size | 7-inches | N.W. | 3.1kg | Product size | 240*200*140mm | ||||
How to Set the Parameters of the Ultrasound Knife
The output power of the ultrasonic scalpel can be set by the “↑” and “↓” buttons on the main interface. A total of 5 gears, the maximum is 5 gears, the minimum is 1 gear, the default is the third gear, you can adjust the output power according to the actual demand.
Click the “Settings” button to set other parameters:
- 1 “Transducer test” can test the resonance frequency and impedance of the transducer and other information.
- 2 “Hand/foot control excitation” can set the ultrasound knife excitation mode, there are three kinds.
- 3 “Host work information” can view a series of host information.
- 4 “Language” only supports English and Chinese for the time being.
- 5 “Brightness” can adjust the brightness of the screen, a total of five stops.
- 6 “System Information” can view the hardware and software version of the host computer.
After setting the parameters, you need to click the “Back” button to return to the boot interface, and then click the “READY” button to re-initialize the cutter head.
Installation and Removal of the Cutter-head
Align the transducer in the socket of the cutter-head on the handle, and then tighten the cutter-head can be. After the cutter-head is installed, you can connect the plug to the host computer to test whether it is installed correctly.
Removal of the cutter-head on the veterinary ultrasonic scalpel is the reverse of the installation procedure.
Frequently Asked Questions (FAQ)
1. What is the primary application of the veterinary ultrasonic scalpel?
It is mainly used for soft tissue cutting, vascular closure, neutering, and minor surgeries in small animals such as cats, dogs, and other pets.
2. How does the veterinary ultrasonic scalpel minimize bleeding during surgery?
The device uses high-frequency vibration (around 55,000Hz) to vaporize water molecules in tissue, break protein hydrogen bonds, and collapse cells. This mechanism enables simultaneous cutting and rapid vessel sealing, achieving a nearly bloodless surgical field.
3. How many power levels are available and how do I adjust them?
The system features 5 output power gears. The default power is set to the 3rd gear. You can easily adjust the power setting up or down by using the “↑” and “↓” buttons on the main screen interface depending on your requirements.
4. What cutter-head specifications are available?
There are three different types of cutter-heads based on length: Short (140mm / SRE114), Middle (230mm / SRE123), and Long (360mm / SRE136). All operate within a frequency range of 55.0 to 56.0 KHz.
5. What parameters can be configured under the Settings menu?
The Settings menu allows you to perform transducer testing (resonance frequency and impedance), adjust hand/foot control excitation modes, check host system information, toggle the language (English/Chinese), and adjust screen brightness.
6. What is the crucial step after installing or replacing the cutter-head?
After physically installing and tightening the cutter-head onto the transducer handle, you must click the “Back” button to return to the main interface, and then click the “READY” button to initialize the cutter-head.